How to use mineral source potassium fulvic acid with good effect

Mineral source fulvic acid potassium is now more popular a plant growth regulator, then, mineral source fulvic acid potassium how to use the effect is good!

Instructions for use of mineral source potassium fulvic acid

1. Vegetables

Drip irrigation and flushing, each dosage per mu: 200g-400g/mu in the seedling stage of leafy vegetables and 500g-800g/mu in the seedling stage (the dosage of tomato crops can be appropriately increased) with an interval of 7-15 days. Base fertilizer 400g(1 bag)/mu is used with regular fertilizer.

2. Fruit trees

Drip irrigation and flushing, 1-2 bags per mu; The dosage of single root irrigation per tree is 10-20g (10g for small trees and 20g for large trees); The bottom is applied with 1-2 bags and regular fertilizer, with an interval of 10-15 days, and the dosage is adjusted according to the size of fruit trees.

3. Field crops

Drip irrigation and flushing are applied at a dosage of 200g-300g per mu, and 1-2 bags per mu are applied at the bottom with regular fertilizer.

Spraying:

Vegetables 5000 times liquid spray;

Corn, rice 7500 times liquid;

Wheat 15000 times liquid;

Fruit trees 3000-5000 times liquid. Due to different crop usage can be adjusted.

Conversion of spraying concentration: diluted 3000 times, I .e. 5g mixed with 30kg of water; Diluted 5000 times, I .e. 3g mixed with 30kg of water.

Attention to the use of mineral source potassium fulvic acid

1. Excessive use

As a functional fertilizer, mineral-derived fulvic acid potassium is deeply loved by fruit and vegetable growers for its function of improving soil microenvironment, stimulating crop growth, improving the quality and increasing the yield of fruits and vegetables, and seizing the opportunity and listing in advance. The truth that things must be reversed is not groundless. Excessive use will inhibit crop growth. Understand the technology, rationally use mineral-derived potassium fulvic acid, and give full play to the strengths of mineral-derived potassium fulvic acid.

2. Dissolve and place

The hardness of water quality varies from place to place. Flocculation may occur after long-term placement of potassium fulvic acid from mineral source after water dissolution. Please dissolve and flush immediately.

3, avoid the mixed use of trace elements and acid fertilizer

Mineral source fulvic acid potassium is alkaline, mixed with traditional trace elements, acid fertilizer may produce antagonism, please use separately to ensure the effect.